Saif Ahmed

FAQ About Saif Ahmed

• What is Saif Ahmed's address?

  Saif Ahmed is located at
  United Arab Emirates

• What is Saif Ahmed's job title?

  Saif Ahmed is a
  • Assessment, analyzing and managing of all Job Hazards evolved on work locations • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Provide safety training and inductions. • Investigate accident/incident report, near-miss/observation report. • Monitor activities on site and raise safety observations and safety notices where necessary. Advise the Senior Site Representative when Stop Work Notices are appropriate. • Monitor and track safety observations and notices to closure. • Continually look for better ways to improve the Hyder H&S procedures and propose ideas for consideration. • Assist the Senior Site Representative to produce a High Risk Activity look ahead programme to ensure that all RAMS are submitted to allow sufficient time for review and comment. • Carry out weekly Site Safety Inspection with Contractor Safety Representative. • Review H&S documentation i.e. RAMS, Inspection reports, accident reports etc for the project as requested by the Hyder Senior Site Representative and advise on the status. • Liaise with the Area H&S Manager to ensure that Hyder H&S procedures are implemented by means of carrying out spot checks and audits. • Following up in implementing the up to date safety regulations through (Safety Meeting, Fire Drills, Safety News, Safety Tours, Training Courses etc.,). • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance.• Briefing and Inductions of New arrivals and preparing the orientation guide. • First Aid Awareness Training. • Fire prevention and Fighting Awareness Training. • Stepping, Handling and Lifting Training. • Confined Space Entry Training. • Electrical Training. • Developing Site evacuation plans. • Following up in implementing the up to date safety regulations through (Safety Meeting, Fire Drills, Safety News, Safety Tours, Training Courses etc.,). • Inspect project facilities to detect existing or potential accident and health hazards, determine corrective actions where indicated and follow up to ensure actions have been complied with. • Determines the standard for safety equipment provides and maintain appropriate safety equipment at company’s facility. • Thoroughly review the Safety Standard Procedure of the Company before start of work at the project site. • Analyze and assess Safety Programs in potential or current Contractor/Sub-Contractor. • Conduct Weekly Safety Meetings and daily Tool Box Meetings to emphasize and discuss safety procedure of the project and on-going project activities. • Identifies high risk potentials in the work place and advice appropriate control measures. • Close Safety supervision to ensure only safe work methods are in operation, adequate fire and fall protection are in place, adequate welfare and first-aid facilities are sufficient, appropriate P.P.E provided and properly worn. • Implementation of safety clearance tags/locks. • Conduct and review Weekly and Monthly Safety Reports of all Contractors within the project • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. •. • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance. • Safety department cost controller.• Execute Management on Health, Safety and Environmental Issues. • Reports to the Company HSE Division Manager. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Conduct training on environmental protection and upkeep. • Analysis of HSE Statistics, KPIs and other reports. • Developing the Company’s HSE and Training Models and implementing them: • Briefing and Inductions of New arrivals and preparing the orientation guide. • First Aid Awareness Training. • Conduct Weekly Safety Meetings and daily Tool Box Meetings to emphasize and discuss safety procedure of the project and on-going project activities. • Identifies high risk potentials in the work place and advice appropriate control measures. • Implementation of safety clearance tags/locks. • Conduct and review Weekly and Monthly Safety Reports of all Contractors within the project • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Provide continuing education of employees to dissemination of safety publication, rules, posters, bulletin boards etc. • Ensure that the employees are trained and competent • Maintain ‘ZERO ACCIDENT’ program. • Rectification of unsafe acts and condition of workers.• Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance. • Safety department cost controller. Albararakha Holding Investment Co

• What industry does Saif Ahmed currently work in?

  Saif Ahmed currently works in the
  Albararakha Holding Investment Co

• What is Saif Ahmed's area of expertise?

  Saif Ahmed specializes in
  • Assessment, analyzing and managing of all Job Hazards evolved on work locations • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Provide safety training and inductions. • Investigate accident/incident report, near-miss/observation report. • Monitor activities on site and raise safety observations and safety notices where necessary. Advise the Senior Site Representative when Stop Work Notices are appropriate. • Monitor and track safety observations and notices to closure. • Continually look for better ways to improve the Hyder H&S procedures and propose ideas for consideration. • Assist the Senior Site Representative to produce a High Risk Activity look ahead programme to ensure that all RAMS are submitted to allow sufficient time for review and comment. • Carry out weekly Site Safety Inspection with Contractor Safety Representative. • Review H&S documentation i.e. RAMS, Inspection reports, accident reports etc for the project as requested by the Hyder Senior Site Representative and advise on the status. • Liaise with the Area H&S Manager to ensure that Hyder H&S procedures are implemented by means of carrying out spot checks and audits. • Following up in implementing the up to date safety regulations through (Safety Meeting, Fire Drills, Safety News, Safety Tours, Training Courses etc.,). • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance.• Briefing and Inductions of New arrivals and preparing the orientation guide. • First Aid Awareness Training. • Fire prevention and Fighting Awareness Training. • Stepping, Handling and Lifting Training. • Confined Space Entry Training. • Electrical Training. • Developing Site evacuation plans. • Following up in implementing the up to date safety regulations through (Safety Meeting, Fire Drills, Safety News, Safety Tours, Training Courses etc.,). • Inspect project facilities to detect existing or potential accident and health hazards, determine corrective actions where indicated and follow up to ensure actions have been complied with. • Determines the standard for safety equipment provides and maintain appropriate safety equipment at company’s facility. • Thoroughly review the Safety Standard Procedure of the Company before start of work at the project site. • Analyze and assess Safety Programs in potential or current Contractor/Sub-Contractor. • Conduct Weekly Safety Meetings and daily Tool Box Meetings to emphasize and discuss safety procedure of the project and on-going project activities. • Identifies high risk potentials in the work place and advice appropriate control measures. • Close Safety supervision to ensure only safe work methods are in operation, adequate fire and fall protection are in place, adequate welfare and first-aid facilities are sufficient, appropriate P.P.E provided and properly worn. • Implementation of safety clearance tags/locks. • Conduct and review Weekly and Monthly Safety Reports of all Contractors within the project • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. •. • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance. • Safety department cost controller.• Execute Management on Health, Safety and Environmental Issues. • Reports to the Company HSE Division Manager. • Assessment, analyzing and managing of all Job Hazards evolved on work locations. • Monitoring the site regularly to ensure corrective actions and to suggest improvements. • Ensuring waste handling and disposal is in accordance with Abu Dhabi environmental regulations. • Conduct training on environmental protection and upkeep. • Analysis of HSE Statistics, KPIs and other reports. • Developing the Company’s HSE and Training Models and implementing them: • Briefing and Inductions of New arrivals and preparing the orientation guide. • First Aid Awareness Training. • Conduct Weekly Safety Meetings and daily Tool Box Meetings to emphasize and discuss safety procedure of the project and on-going project activities. • Identifies high risk potentials in the work place and advice appropriate control measures. • Implementation of safety clearance tags/locks. • Conduct and review Weekly and Monthly Safety Reports of all Contractors within the project • Conduct Site Safety orientation and induction for the workers arrived at the job site before they are allowed to commence their job. • Daily inspection of the electrical, mechanical tools used by the workers to ensure that in good condition, guarded etc to prevent any untoward incident or accident may happen. • Conduct and review weekly checklist, monthly statistics safety report, monthly report of all contractor / within the project. • Initiate immediate stoppage of any operation or work that in our judgment could cause death, injury or extensive damage to properly and notify all concerned for immediate corrective measures to eliminate the hazards. • Provide continuing education of employees to dissemination of safety publication, rules, posters, bulletin boards etc. • Ensure that the employees are trained and competent • Maintain ‘ZERO ACCIDENT’ program. • Rectification of unsafe acts and condition of workers.• Provide guidelines and direction to the safety staff on the implementation of the company HSE policy, HSE plan, and HSE procedures aiming to achieving zero accident. • Check the work places hygiene, safety rules and regulations are applied during the execution of all phases of work and serve notice in case of non-compliance. • Organize, control and monitor safety department resources and costs. Provide safety training and inductions. • Enhance personal safety awareness through weekly safety meeting, toolbox talks, safety bulletins, Posters, Rewarding disciplinary action on safety violations, Run readymade safety training programs, ….. etc. • Issue accident/incident and investigation report, near-miss/observation report. • Issue HSE weekly/monthly report, safety statistics. • Order safety materials and equipment, control usage and maintenance. • Safety department cost controller.

• Which languages does Saif Ahmed speak? 

  Saif Ahmed speaks the following languages:
  No languages available.

• Which industries has Saif Ahmed previously worked in?   

  Saif Ahmed has prior experience in the following industries:
  Albararakha Holding Investment Co , Hyder Consulting Middle East, Abu dhabi , Saudi Oger , Gulf Contracting Company, Abu dhabi , Arabian Construction Company (ACC) Abu dhabi , TAISEI CORPORATION MIDDLE EAST , Aakash Civil Works

• What is Saif Ahmed’s work experience?  

  Saif Ahmed has the following professional experience:
  Albararakha Holding Investment Co , Hyder Consulting Middle East, Abu dhabi , Saudi Oger , Gulf Contracting Company, Abu dhabi , Arabian Construction Company (ACC) Abu dhabi , TAISEI CORPORATION MIDDLE EAST , Aakash Civil Works .

• How can I find Saif Ahmed on LinkedIn?  

  You can view Saif Ahmed’s
  LinkedIn profile at LinkedIn URL.

• What are Saif Ahmed’s work email addresses?  

  Saif Ahmed’s work email addresses are
  [email protected] .

• What company does Saif Ahmed work for?  

  Saif Ahmed works at
  Albararakha Holding Investment Co